Warning: Undefined array key "HTTP_REFERER" in /var/www/wp-content/themes/drone-media/drone-media.theme#archive on line 43

Meggaflash Technologies Ltd

pf200

To find f-stop divide guide number by distance in feet between flashbulb and subject. (example: with film speed 40, guide number is 220 at a shutter speed of 1/125 sec., distance 10ft lens setting 220 ÷ 10 is f/22)

Ansocochrome T/100 - use with 81D filter. Koda-chrome II prof. Type A, Ektachrome Type B and high speed Ektachrome Type B - Use with 81C filter. Ektachrome Prof. and Day - Use with 80C filter.

Table computed for 7-inch polished reflector. If large studio type reflector is used, stop down 1/2 to 1 f-stops. Use on voltages from 3 to 125 volts.

- Warnings printed on packaging should be read carefully prior to use
- Avoid Static
- Numerical data is typical

pf300

To find f-stop divide guide number by distance in feet between flashbulb and subject. (example: with film speed 40, guide number is 400, distance 35ft lens setting 400 ÷ 35 is f/11)

Ansocochrome T/100 - use with 81D filter. Koda-chrome II prof. Type A, Ektachrome Type B and high speed Ektachrome Type B - Use with 81C filter. Ektachrome Prof. and Day - Use with 80C filter.

Table computed for 7-inch polished reflector. If large studio type reflector is used, stop down 1/2 to 1 f-stops. Use on voltages from 3 to 125 volts.
- Warnings printed on packaging should be read carefully prior to use
- Avoid Static
- Numerical data is typical

pf330

- Includes bulb diameter tolerance and eccentricity of bulb to base
- Warning printed on packaging should be read carefully prior to use
- Avoid Static
- Numerical data is typical

For Further Information Contact:
Meggaflash Technologies Tel +353 65 22677
Clonroad Business Park, Fax +353 65 22688
Clonroad, Ennis, County Clare, email [email protected]
Republic of Ireland http://www.meggaflash.com